|
|
 |
| |
| HVAC
INDUSTRY NEWS |
Fluke VT02 Visual IR Thermometer Enables Quick Visual
Inspection of HVAC/R Systems.
According to the U.S. Small Business Administration, 40
percent of electrical use in commercial buildings is
consumed by HVAC/R systems. With the summer heat
approaching, HVAC/R systems should be tuned-up to run at
maximum efficiency to avoid wasting energy, system
downtime, and expensive emergency maintenance.
 An
efficient way to start is to make a quick visual
inspection of the system with a visual IR thermometer to
identify potential issues that need further
investigation.
The Fluke® VT02 Visual IR Thermometer, a troubleshooting
camera with an infrared heat map, combines the
convenience of a single-spot IR thermometer with the
visual insight of an infrared camera. The thermal heat
map quickly detects the exact location of potential
problem areas and gives you context with your findings.
Troubleshooting HVAC/R systems is much faster with the
VT02 than an infrared thermometer. The VT02 instantly
detects problems using blended thermal heat map and
digital images. It displays and saves images as full
visual, full infrared, or in three blended modes (25,
50, and 75 percent). Markers pinpoint hot and cold spots
indicating the hottest temperature with a red box and
the coldest with a blue box. A temperature reading is
provided at the center point. Images are saved to the
micro-SD card, eliminating the need to write down single
or multiple measurements.
Story
continues below ↓
|
advertisement |
your ad here
|
Affordable, compact, and intuitive, the VT02 operates
with focus-free simplicity, expanding the user base from
senior to junior technicians. Images from the VT02 can
be imported into SmartView® analysis and reporting
software, included with the VT02, to produce
professional reports that document problems detected or
repairs made for management and customer review.
Pricing and Availability
For more information about the Visual IR Thermometer,
visit: www.fluke.com/VT02.
For information on Fluke tools and applications, or to
find the location of the nearest Fluke distributor,
contact Fluke Corporation, P.O. Box 9090, Everett, WA
USA 98206, call (800) 44-FLUKE (800-443-5853), fax (425)
446-5116, e-mail fluke-info@fluke.com or visit the Fluke
Web site at www.fluke.com.
###
|
|
|
|
|
